Phase 10 Tracker
Keep your Phase 10 game organized with this all-in-one printable case and tracker.
The case includes a built-in phase tracker with individual marker positions for each player. A removable card carrier holds the draw pile, discard pile, and game pieces during play, then fits back inside the case for storage.
The main case is fully print-in-place, including the hinge and latch, so no separate hardware or assembly is required.
Important: After printing, carefully break the print-in-place hinges free using localized pressure directly around each hinge. Avoid twisting or flexing the entire case, as this could crack or break the case walls. Work each hinge gradually until it moves freely.
Printing Notes
Print the case in its uploaded orientation. Make sure your printer is well calibrated for print-in-place hinges and moving latch clearances.
Recommended MaterialsPLA or PETG is recommended for easy printing and clean detail.
Disclaimer: This is an independently designed accessory and is not affiliated with or endorsed by Mattel. Cards are not included.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
