2025-03-09 01:17:15
3.5k
434
Pompom factory
@A2SdESIGN_538575
Donate
Message
Follow
Recommended printing method
Add
Pompom Factory PLA 0.4
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 2h 01m 56s
151
Share
Description
Step by step instructions.
First, pass a small piece of wool or rope through the central slot and the two side holes.
Roll the wool loosely until you see an optimal thickness
Tie the short piece around the ball
Cut the sides of the ball through the side slots
Remove the pompom from the tool
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
