Print-in-Place Hot Air Balloon – Support-Free
Bring a classic hot-air balloon to life straight from the build plate. This detailed display model prints in place as one complete design and requires no support structures. The flowing envelope, open framework and textured basket create a light, elegant silhouette that looks impressive from every angle.
The model was designed for clean FDM printing with a 0.4 mm nozzle. A prepared Anycubic Kobra S1 3MF profile is supplied, and the universal STL is included for custom slicing or scaling.
Recommended setup
• Material: PLA
• Nozzle: 0.4 mm
• Supports: disabled
• Print orientation: as supplied in the 3MF profile
• Use good bed adhesion and allow the print to cool before removal
The balloon works well as a desk display, shelf decoration, gift, nursery accent or lightweight ornament. The integrated loop at the top can be used for display, while the design itself contains no hanging thread. Real-print photos show the finished result directly from an FDM printer.
If you resize the model, check that the thin framework and clearances remain printable for your nozzle and material.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
