2024-12-27 21:49:00
400
13
Sakura no Samurai - Hueforge
@Ciapelo_2164365
Donate
Message
Follow
Recommended printing method
Add
Sakura no Samurai - Hueforge
Kobra 3
Kobra S1 Max
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 2h46m
8
Share
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 111.63x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Dark Blue Transmission Distance: 2
PLA BambuLab Basic Pink Transmission Distance: 8
PLA+ Sunlu Beige Transmission Distance: 7.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Pink
At layer #19 (1.6mm) swap to Beige for the rest.
Tags
License
