2024-11-25 00:20:26
784
32
Santa Christmas Tree Hanger Spinner Ornament
@NoProblem_1469330
Donate
Message
Follow
Recommended printing method
Add
AC Profile
Kobra 3
Kobra S1 Max
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 1h 44m 16s
13
Share
Description
Santa Christmas Tree Hanger Spinner Ornament.
Dual sided Santa Christmas Tree Hanger Spinner Ornament using white, red, and black. These come out real nice.
You will need supports, they are set to break off real easy.
After supports are removed the spinning hanger pole needs to be worked/twisted back and forth firm but gentle until it breaks free and turns. The inside section will eventually break free and allow the hanger stem to spin freely. It takes a little finesse don't try to torque it to hard either direction.
Size: 100mm x 130mm x 6mm
If it's no trouble, leave a like, rating and upload your print if you liked this file. Check my profile for more!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
