Santa Claus vs. Spaceship – Christmas Scene 🎅🎁🚀✨
Bring humor and sci-fi fun to your holiday decorations!
This unique Christmas scene shows Santa Claus holding his sack full of presents while a mischievous spaceship tries to steal it, creating a playful mix of classic holiday charm and futuristic fantasy. With smooth printable geometry, expressive details, and a dynamic composition, this model adds a fun, unexpected twist to traditional Christmas décor.
⭐ Features:
- Detailed Santa Claus holding a sack full of gifts
- Fun sci-fi spaceship interacting with the scene
🎄 Great for:
- Christmas table centerpieces
- Fun and unique holiday decorations
- Sci-fi & Christmas mashup displays
🚀Caution:
- Removing the support from Santa requires a lot of patience without breaking his legs.
- Also, gluing and measuring the sewing thread requires some patience, but it works, and you'll be rewarded in the end.
- Printing Santa in color produces a lot of waste.
📝 Note and Tipps:
- For older 3D printers please use a border (print adhesion).
- This model is designed for decorative use – not a toy
- Please remove the supports carefully.
- Use dry filament and a clean print bed; it's best to clean the print bed with Isopropanol
- I use also the cool plate (Gecko)
- Print multiple copies at once to reduce waste.
Print/cut and assembly instructions
1. Print all parts.
2. Glue the pieces together.
![]()
![]()
I would be happy if I get your feedback!
Let me know which printer, nozzle, and filament you used—and feel free to share a photo!
🔔Note:
I printed it myself with a Kobra 3 V2 Combo and I used the following filaments and the published print profiles. I had no problems during printing. Minor adjustments such as scaling, wall thickness, or support settings may be required depending on your printer and material.
🌀 Used Filaments:
· OVERTURE PLA Matte – white, black, grey, light brown
· eSun – red
🔩 Part List
Magnets: 3 Piece 10x3mm and 2 Piece 6x2mm
Of course, I'll be releasing more models soon!
I'd be very happy if you'd follow me.![]()
I would also be very happy about a comment or a “thumbs up”!![]()
Of course, I would also be very grateful for a small donation for my work.![]()
