2025-11-28 04:41:16
1.1k
31
Santa gnome (NO ACE NEEDED)
@Holdctrl_5145101
Donate
Message
Follow
Recommended printing method
Add
separated pieces ( no ace ) 12cm tall
Kobra 3 V2
/ Plates:3
/ 0m
one color 12cm tall
Kobra 3 V2
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 1h16m
33
Share
Description
Pliers are recommended due to some of the Supports are difficult to remove.
Peices fit tightly together with a little force if needed. Glue is optional but if you want it to be one solid piece it should be glued.
Print settings⚙️:
12% infill or more
0.20mm or less for smoother top
Supports oon
Scale to preference
If you are interested in selling physical prints of this model and others on our profile you can get the Comercial licenses on our page or on our patreon which also gives you early access and exclusive models!
https://www.patreon.com/c/Hold_Ctrl
Thank you!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
