Santa in Chimney

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x228.07mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 1.1mm

Filaments Used:

PLA Anycubic Black Transmission Distance: 0.6

PLA Anycubic White Transmission Distance: 5

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to White for the rest.