🩸 SCREAM – Hueforge Art Panel (Halloween Edition)

This is my first model made with Hueforge, a Halloween-themed project inspired by the famous movie SCREAM 🎬🔪

I chose to create a simple design suitable for everyone, even those who don't have a multicolor system like AMS or ACE Pro. No color mixing is necessary: ​​simply change filament on specific layers, setting manual pauses directly from the slicer.

───────────────────────────────

⚙️ Files and print settings

📂 Included file: Scream Hueforge_129x200.3mf

Recommended settings:

• Layer height: 0.08 mm

• Base layer: 0.16 mm

• Infill: 100% (Rectilinear)

• Wall loops: 1

• Model dimensions: 129.03 × 200 mm

• Maximum thickness allowed: 2.24 mm (effective 2.23267 mm)

• Brim: optional but recommended for improved adhesion

💡 It is possible to print with higher layers, as long as they remain below the base thickness of 0.48 mm.

───────────────────────────────

🎨 PLA Used and Instruction for Swap/Pause:

•Start with Black

•At layer #7 (0.64mm), swap to White (or Glow for a more beautiful effect in the dark)

•At layer #16 (1.36mm), swap to Black

•At layer #18 (1.52mm), swap to Red for the rest.

──────────────────────────────────────

🧩 Additional Notes

• An Ams/Ace pro system is not required: simply insert manual pauses in the indicated layers.

• Simple yet effective design, perfect for Halloween or for fans of classic horror films.

• We recommend using Anycubic filament for optimal results and visual consistency.

⚠️ Disclaimer:

This model was created entirely in Hueforge for artistic use and is not officially affiliated with the "Scream" franchise.

🖨 Tested Printers

• Anycubic Kobra 3 Combo 👉 Link
• Anycubic Kobra 3 V2 Combo 👉 Link

🎁 Special Anycubic Discount

By purchasing through my affiliate link, you can use the following exclusive coupon code:

🧾 Coupon: WLOUTRVZCM

🎉 $20 OFF your order!

👉 Visit the Anycubic Shop