2025-10-31 04:15:16
1.2k
23
Sexy Ghost Holding Lamp
@PlaDreams_4057917
Donate
Message
Follow
Recommended printing method
Add
0.2mm with supports
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:2
/ 5h16m
16
Share
Description
This is my sexy ghost for Halloween decoration.
Its an easy print but does require a few supports.
Although they should come off easily, please take extra care on the lamp support as you might break the arm
I used Pla Wood for the tree trunk.
Depending on your filament type you might need to expand the holes a bit. I only needed glue for the hand, and used UV resin glue.
You might want to use a small torch to smooth out any rough spots.
Fits a led tea light 35D x 35W x 35H millimetres
that you can buy pretty much anywhere.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
