0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-10-16 02:19:12
7.2k
599
Report

Star Wars Infinite Hangar

@julianfj_711672
Message
Follow
Recommended printing method
Description

Infinity Mirror: Empire Hangar


This infinity mirror recreates the epic atmosphere of an Imperial hangar, featuring two TIE fighters that seem to stretch into infinity thanks to the LED lighting effects. It’s a unique decorative piece, perfect for Star Wars fans looking to add a special touch to their home or collection.


Do you have questions about the assembly or the electronics? Comment and I will help you!


picture


Materials and Recommendations:




  • Luminous and Glitter Filament: Luminous filament is used for the white parts, producing a beautiful effect when the LEDs are off. Additionally, using glitter filament adds a metallic touch.


  • WS2812 LEDs and Controller: The design uses 77 WS2812 LEDs controlled by an Arduino D1 Mini with WLED, allowing for programmable effects. Alternatively, a simple 5V LED strip can be used without effects.
  • like this https://es.aliexpress.com/item/32682015405.html
  • like this https://es.aliexpress.com/item/1005005344198522.html


  • Electronics Box: Includes a dedicated space for the electronics on the back of the mirror. The hole for the power connector can be adjusted in the slicing software according to the cable size.


picture


Technical Details:


  • WLED Configuration: The LEDs are divided into two segments to differentiate between the outer ring and the lights inside the columns, allowing for independent control of effects. If you are just going to use a simple LED strip, ignore this.


  • Assembly and Fitting: All pieces fit together snugly for easy assembly, but you can use cyanoacrylate for added security.


  • Printing Options: The design is intended to be printed without supports (except for the electronics box, which requires a few).



Tags
starwars
vader
hangar
tie
star
wars
galaxias
nave
espacio
License