2026-09-18 16:24:27
935
93
Suspended tealight
@pozsar_4308928
Donate
Message
Follow
Recommended printing method
Add
0.2mm layer, 2 walls, 8% infill
Kobra S1
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 2h22m
37
Share
Description
Check out the print timelapse and support removal video here.
I recommend using LED tealights. I have tested it with real tealights too without any issues, but keep in mind: PLA is not fire-safe. Use real tealight only at your own risk.
This print is pretty difficult to set up properly so please just use the prepared 3mf file that contains custom supports and all necessary settings.
Not scalable. Must be printed with 0.2mm layer height.
Be very careful when removing the support. I recommend using pliers to break off each branch one-by-one.
Commercial License:
You can subscribe for a commercial license membership on my Patreon.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
