TYLER THE CREATOR Filament Painting no ace pro / ams
🎤 TYLER THE CREATOR – Hueforge Painting no ace pro / ams
This project, created with Hueforge, is an artistic tribute to Tyler the Creator. I wanted to create an elegant yet easy-to-print design, suitable even for those who don't have a multicolor system like AMS or ACE Pro.
No automatic color mixing is required: simply set manual pauses at the indicated layers, directly from the slicer.
⚙️ Files and print settings
Recommended settings:
• Layer height: 0.08 mm
• Base layer: 0.16 mm
• Infill: 100% (Rectilinear)
• Wall loops: 1
• Model dimensions: 200 × 150 mm
• Maximum thickness allowed: 2.24 mm (effective 2.23267 mm)
• Brim: optional but recommended for improved adhesion
💡 It is possible to print with higher layers, as long as they remain below the base thickness of 0.48 mm.
──────────────────────────────
🎨 PLA Used and Instruction for Swap/Pause:
•Start with Black
•At layer #8 (0.72mm) swap to Blue Gray
•At layer #15 (1.2mm) swap to Grey
•At layer #20 (1.68mm) swap to White for the rest.
🧩An Ams/Ace pro system is not required: simply insert manual pauses in the indicated layers.
──────────────────────────────
🖨 Tested Printers
🎁 Special Anycubic Discount
By purchasing through my affiliate link, you can use the following exclusive coupon code:
🧾 Coupon: WLOUTRVZCM
🎉 $20 OFF your order!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
