The Last Rose – Halloween Skull Candle Stand
Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.
You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.
Among the thorns, a rose still blooms. Above the skull, one small light remains.
This Halloween candle holder brings together a skull, sculpted roses and winding thorn-like forms in a dark fantasy design. A place at the top holds an LED candle, casting a gentle glow over the details below. It makes a striking decoration for a Halloween display, gothic shelf or tabletop fantasy scene.
Model dimensions: X 93 × Y 84 × Z 168 mm.
Use an LED candle only. Do not use a real flame with an FDM print.
Guide
Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:
1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.
Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.
- Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
- Recommendations:
- 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
- PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
- Clean the plate thoroughly before printing.
- Make sure the filament is dry and free from dirt. This can damage the print or weaken the support
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
