The Undead Awakening – Zombie in a Jack-o’-Lantern

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Something undead is rising from the pumpkin!

This spooky Halloween model features a terrifying zombie bursting through the broken top of a sinister jack-o’-lantern. With its outstretched arms, skeletal face, torn clothing and the pumpkin’s menacing expression, it creates a dramatic decoration for any Halloween display.

The model is available in two printing versions:

• Single-color version – designed to be printed as a traditional single-color FDM model.

• Multicolor version – divided into separate parts that can be printed individually in different filament colors and assembled afterward.

Neither version requires a multicolor printer, AMS, ACE Pro or a similar filament-changing system. The separated multicolor version makes it easy to create a colorful finished model using any standard single-extruder FDM printer.

Supports are required in selected areas due to the zombie’s extended arms and detailed shapes. Remove them carefully, especially around the hands, fingers, face, torn clothing and the inside of the pumpkin.

Perfect as a Halloween decoration, tabletop centerpiece, spooky collectible or an eye-catching addition to a horror-themed display.

   Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
•  
•  
• Recommendations:
• 
  
•  
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
•  
• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
•  
• Clean the plate thoroughly before printing.
• Make sure the filament is dry and free from dirt. This can damage the print or weaken the support