Triangle Super Fidget

I made this Triangle Super Fidget as a print-in-place toy in a single triangle shape. Its layered, twisting walls fold and flex as you handle it, and the sharp triangle outline is what sets it apart from the square and hexagon versions. The part I like most is how bold it looks in a bright color. I really recommend printing it in a strong, engaging color so the shape really stands out.

Print settings:

• Infill: 2%-15%
• Infill Type: Gyroid
• Supports: NO
• Brim: NO
• Filament: PLA or PETG or ABS/ASA
• Listed profile: 1 plate in 47 minutes 21 seconds, using 21.26 g of PLA, with standard settings applied for the best results.

Tips:

• The catch is the first layer: if you are having problems, clean the print bed and check the first layer, because it is the most crucial layer in the print.
• The whole print is just perimeters.

My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.

You may also like:

• Hexa-Triangle Super Fidget https://www.makeronline.com/en/model/Hexa-Triangle%20Super%20Fidget/170413.html
• Tri-Hexagon Super Fidget (Print-In-Place) https://www.makeronline.com/en/model/Tri-Hexagon%20Super%20Fidget%20(Print-In-Place)/167960.html
• (Super) Multi-Square Fidget https://www.makeronline.com/en/model/(Super)%20Multi-Square%20Fidget/161506.html
• Square Super-Fidget (Print-In-Place) https://www.makeronline.com/en/model/Square%20Super-Fidget%20(Print-In-Place)/158453.html
• Gyroscopic Fidget Ring (2 in 1 Fidget) https://www.makeronline.com/en/model/Gyroscopic%20Fidget%20Ring%20(2%20in%201%20Fidget)/185527.html