Valentine Heart Lamp with Picture Frame

Light up your memories with this heart-shaped Valentine lamp, designed to be both a romantic decoration and a picture frame! This 3D-printed model features a sleek and modern heart frame that elegantly holds a photo at the end, making it a perfect gift for your loved one.

Features:

❤️ Heart-Shaped Frame – Holds a small picture to personalize your design.

💡 LED-Compatible – Designed to house an LED light for a warm, romantic glow.

🎁 Perfect Gift – Great for Valentine's Day, anniversaries, weddings, or as a meaningful keepsake.

🏡 Stylish Home Decor – Adds a cozy and sentimental touch to any space.

🖨️ Easy to Print – Designed for FDM and SLA 3D printers, requiring minimal supports.

Printing Recommendations:

• Layer Height: 0.2mm (or finer for a smoother finish)
• Infill: 15-20% for durability
• Material: PLA, PETG, or any filament of your choice

Support Settings (Cura/Slicer Recommended):

• Enable Support: ✅ Yes
• Type: Normal (Auto)
• Style: Snug
• Threshold Angle: 45°
• First Layer Density: 90%
• First Layer Expansion: 0.8mm
• Remove Small Overhangs: ✅ Yes
• Top Z Distance: 0.3mm
• Bottom Z Distance: 0.3mm
• Base Pattern Spacing: 2.5mm
• Top Interface Layers: 3
• Bottom Interface Layers: 3
• Top Interface Spacing: 0.6mm
• Bottom Interface Spacing: 0.6mm
• Support/Object XY Distance: 0.45mm

Recommended Part Orientation:

To minimize supports, I recommend orienting the parts as follows:

• Heart: Lay it flat on its face.
• Base: Position it with the walls facing upwards.
• Top Base: Keep the points facing upwards.

Electronics & LED Installation:

• The LED strip used is 10mm wide.
• A universal plug with two wires (+ and -) was used for power.
• The plug was secured with hot glue.
• Extra space was added to accommodate the components of an RGB receiver (without the plastic casing).
• Feel free to adjust the design to fit your specific LED setup and wiring needs.

Your Feedback Matters!

Based on your feedback, I will continue improving this design to make it perfect! Let me know if you have any suggestions, remixes, or modifications that could enhance the print.

💬 If you print this model, feel free to share your makes and tag me! Feedback and remixes are always welcome. ❤️

📩 Like this design? Hit the ❤️ button and follow for more creative 3D prints!

PS: I didn't have a picture to put in so i just added a piece of paper.