Wall Mounted Filament Swatch System - 60 Swatch Slots

Keep track of all your filament colors and materials with this minimalist swatch system. Print each card in the filament it represents, write the details with a permanent marker, and hang them on the wall for a clean and organized overview.

Includes:

• Filament swatch card with writing field and hole if you want to use a different organization method.
• 60 slot wall mounted holder (170x160mm footprint).
• Tolerance test file. Print this first to verify fitment!

Swatch Card Dimensions:

• 60 x 40 x 4mm
• Hole diameter: 5mm

Print Settings - Card:

• No supports
• Any layer height
• Print in the filament you want to display

Print Settings - Holder:

• No supports required
• 0.20 mm layer height recommended
• 10-15% infill (Gyroid)
• Print time approximately 10-11 hours

Note: Tolerance printed and verified.

Print the included test file at 45 degrees before printing the full holder to verify tolerances on your printer. Let me know if I can help with anything!