Wolf Face Hueforge

Wolf Face Hueforge

I print all of my Hueforge with a .4 nozzle

Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap at layer.

Any of my 200 x 200 Frames can be used. Just glue them together.

STLs, Bambu Studio profile, and Anycubic Next profiles are uploaded.

Check out my selection of Hueforge.

Colors used

Black - Elegoo Rapid Black Pla Plus

Blue Grey - Bambu Blue Grey

Ash Grey - Bambu Ash Grey

STLs

In Bambu Studio or Anycubic Next load all STL's at one time. It will ask “Load these files as a single object with multiple parts?”. Click yes. Then right click on each object and click the color for that object.

Or pause at the desired layer height to change colors.

Bambu Studio and Anycubic Next Files

Included is the studio print profile file.

These files are designed to be used with an AMS/ACE.

Commercial License

As of 2/25/24 my designs are no longer allowed to be sold commercially.

Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. 

Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.

Designers spend a lot of time and money on design! Supporting Patreon's is a small way to help us designers out and show your appreciation for the models. Not just appreciation for what we design but the time and money we put into designing and publishing.

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Matte Ash Gray Transmission Distance: 1.5

PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Blue Gray

At layer #13 (1.12mm) swap to Ash Gray

At layer #18 (1.52mm) swap to White for the rest.