
No data
Purge is set to 0.8 now . This model used 0.3 that's why there are visible mixed color layers. Let the brim to auto or you can change it to manual and 10mm but works perfect with auto (5mm).
Printed using PLA/PLA+ red mainly and black/white for the eyes. 0.4mm nozzle and 0.2mm layer height.
Be careful when removing the tree supports, some may require some force.
Flush the filament change into the purge tower , infill and supports ---> works great
Facebook
Pinterest
Twitter
Reddit
The model cannot be found
The model may not have been published or does not exist
