mario bros argentina

Project: mario argentina.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 150x150mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3.1mm and the Actual Depth is 3.2mm

Filaments Used:

PLA smartfil black Transmission Distance: 0.4

PLA smartfil marron Transmission Distance: 5

PLA smartfil azul oscuro Transmission Distance: 3

PLA smartfil azul Transmission Distance: 1.8

PLA smartfil naranja Transmission Distance: 1.2

PLA smatfil amarillo Transmission Distance: 5.8

PLA smartfil White Transmission Distance: 6

This print uses 7 unique filaments

Swap Instructions:

Start with black

At layer #12 (1.04mm) swap to marron

At layer #13 (1.12mm) swap to azul oscuro

At layer #20 (1.68mm) swap to azul

At layer #29 (2.4mm) swap to naranja

At layer #30 (2.48mm) swap to amarillo

At layer #33 (2.72mm) swap to White for the rest.