Honeycomb storage wall (hsw) hook for Kobra S1

Hook for mounting a Honeycomb storage wall on the side of the Anycubic Kobra S1.

Use hooks both at the top and the bottom.

Update: Added a screw on version for the left side of the printer. This is designed for the left side and where the outer hex is at the top of the mesh. see picture.

Update: Added a new sleeker design with a hex cutout that matches the inserts, so there is a possibility to attach accessories. The new hook has "hex" in the file name.

Update: Added a version that mounts using the case screws at the back for attatching heavier stuff to the grid plates, for example a spool holder. This is designed for the right side and where the outer hex is not at the top of the mesh. see picture.

Generate grid plates here: https://gridfinity.perplexinglabs.com/pr/hsw/0/0.

Create one that is 8 squares high and one that is 9 squares high, with any width of your choice.

Remember to check the "flip staggering" check box on one of them so they become mirrored.

I have also made hooks for

openGrid https://www.makeronline.com/en/model/openGrid%20hook%20for%20Kobra%20S1/217924.html

Multiboard https://www.makeronline.com/en/model/Multiboard%20mounting%20hook%20for%20Kobra%20S1/169242.html