0
0
:
0
0
:
0
0
:
0
0
Anycubic 11 周年,记录属于你的 3D 打印时刻
Makeronline
2026-10-16 17:50:14
359
17
举报

Print-in-Place Hot Air Balloon – Support-Free

@JAV3D_3586963
私信
关注
描述

Bring a classic hot-air balloon to life straight from the build plate. This detailed display model prints in place as one complete design and requires no support structures. The flowing envelope, open framework and textured basket create a light, elegant silhouette that looks impressive from every angle.


The model was designed for clean FDM printing with a 0.4 mm nozzle. A prepared Anycubic Kobra S1 3MF profile is supplied, and the universal STL is included for custom slicing or scaling.


Recommended setup

• Material: PLA

• Nozzle: 0.4 mm

• Supports: disabled

• Print orientation: as supplied in the 3MF profile

• Use good bed adhesion and allow the print to cool before removal


The balloon works well as a desk display, shelf decoration, gift, nursery accent or lightweight ornament. The integrated loop at the top can be used for display, while the design itself contains no hanging thread. Real-print photos show the finished result directly from an FDM printer.


If you resize the model, check that the thin framework and clearances remain printable for your nozzle and material.

标签
balloon
printinplace
hotairballoon
supportfree
nosupports
homedecor
ornament
aviation
basket
miniature
sculpture
pla
fdm
3mf
stl
displaymodel
giftidea
singlepiece
easyprint
kobraS1
版权声明
Standard Digital File License
该作品受标Standard Digital File License保护。
您不得分享、转授权、出售、出租、托管、转让或分发该数字文件或该对象的3D打印版本,以及以数字或物理形式存在的任何其他衍生作品(包括混音)。未经许可,您不得以任何方式使用这些物品进行费用收取。