Tissue Box

This particular tissue box has been designed taking inspiration from books.

It can be used both vertically and horizontally.

I have also created a tricolor version which, in my case, I made like the Italian flag.

Fits with most common kleenex and similar tissue box!

WARNING!

The model is narrow and very tall during printing, so go slow! Use 50mm/s for the outer wall and 100mm/s for the inner walls. Do not run, otherwise it will come out poorly due to vibrations. I opted for the fuzzy skin because I think it looks great for this object.

-- PRINTING PROBLEMS --

I know how frustrating it can be to have problems during a print, and I’m happy to receive constructive criticism or suggestions about the model, but please always calibrate the flow and if you have adhesion problems, try using the brim or a gripper. All these fails are not due to the model. 

All my files are tested before being published and the print profile with which I succeed is the one I publish. 

Thank you very much for your understanding and happy printing to everyone!